| | Remote control upgrade for
Hormann / Garador garage door operators Don't despair if your original transmitters are obsolete | 
Hormann key-fob
discontinued
| 
Hormann handset
discontinued | We have a convenient & easy to fit key-fob style radio control upgrade with high security anti-scan "code hopping" technology to suit Hormann garage door operators 
Our mini key-fob alternative
| Our upgrade kit comprises of a new remote control transmitter and a
matching radio receiver module that can be fitted to your existing Hormann garage door operator within about 5 minutes with no technical knowledge |
| Hormann "SupraMatic S"
& GTS series door operators
(also Marantec Comfort 130 - 140)
These models have three terminals to connect
the Seip EKR1MCG upgrade receiver kit. (the terminal cover has been removed in these photo's to reveal the connections)Click image to enlarge
Before - with the original Hormann receiver Note: the original Hormann receiver unit can
be unplugged and removed (see F.A.Q.) | | Click image to enlarge
After - with new Seip receiver upgrade kit fittedConnect the Seip EKR1MCG receiver as follows:-
black/blue wires to terminal 1 (left terminal)
blue wire to terminal 2 (centre terminal)
red wire to terminal 3 (right terminal)
(our upgrade kit fitted with fork terminals
includes three screws to suit these terminals) Note: The above info also applies to the Marantec Comfort
130 - 140 operators as both products are very similar |
|
| Click image for more detail
Hormann "SupraMatic E" | Fitting a Seip EKR1MCG receiver & keyfob
upgrade to current Hormann / Garador operators
(order our upgrade kit with three wire ends)Hormann "SupraMatic E" (also Garador Auto Expert) disconnect the original Hormann receiver unit (green brown & white wires) and connect the new Seip receiver unit as follows:
terminal 20 = common (black & blue wires)
terminal 21 = impulse (blue wire)
terminal 5 = 24v DC supply (red wire) | Click image for more detail
Hormann Ecomatic | Hormann Ecomatic
disconnect the original Hormann receiver unit (green brown & white wires) from terminals 1,2 & 3 and connect the wires from new Seip receiver unit as follows:
terminal 1 = common (black & blue wires)
terminal 2 = impulse (blue wire)
terminal 3 = 24v DC supply (red wire) | Click image for more detail
The original Hormann/Garador receiver unit can be removed (see F.A.Q.) | | Note: If you have an early Hormann operator with no 24 volt connections to provide power for an alternative radio receiver system but it does have a pair of terminals for connecting a wall mounted pushbutton control switch you can use the Seip EKR1MCT 230 volt mains powered receiver kit |
|
| |
Click to enlarge image
Seip EKR1MCG 433Mhz receiver & keyfob transmitter kit
receiver module dimensions 84mm x 26mm x 19mm
(shown with mini & midi keyfob) | An ideal upgrade for older garage door operators for which replacement handsets are no longer available From Europe's leading garage door operator manufacturer 
|
Simple D.I.Y. Installation We even supply
a screwdriver ! |
Can be installed and working within about
5 minutes with no technical knowledge
Don't just take our word for it ! - Read what our customers say ! | To anyone considering a Seip EKR1MCG remote control receiver kit :- The equipment works easily - Its installation takes literally 5 minutes. But if you've little electrical knowledge, like me, consider the back-up service you get! Anything you need to know, any time, the craziest of problems, this company is at the end of an e-mail. This has been the best service I have received for a product like this literally for years
USE THEM !!! THEY'RE THE BEST!!!
Gareth Davies, Kent. | | I Bought a Seip EKR1MCG receiver/keyfob kit to update my Hormann Ecomatic garage door operator. Have to say the fitting was extremely easy and genuinely <5min from start to finish. Pre-sales technical support from Nick Goldring was impressive & faultless. The Seip mini keyfob remotes are also much nicer (& smaller) than the Hormann ones. Buy with confidence!
Simon, Durham. | Read More Reviews from Satisfied Customers
|
| | Would you like to add remote control to your :- |  | Garden Lighting
Water Features
Pond Pumps
or Entrance Gates ? | Seip manufacture a receiver to enable items such as gates or garden pumps & lights etc. to be operated from spare buttons on your Seip keyfob transmitter, the receiver is housed in a weatherproof enclosure making it suitable for indoor or outdoor applications Click Here for Further Details |
| |
MPT 1340 UK approved 433Mhz frequencies
Range aprox 75 - 100 mtrs |
German Quality at your Fingertips !
| Frequently Asked Questions Q/ If my aging electric operator fails, can the new Seip keyfobs be used with a replacement electric operator ?
A/ Yes - Seip are Europe's leading garage door operator manufacturer and the keyfob transmitters supplied with our upgrade kits are compatible with the Seip TS series electric door operator range Q/ Can I use the spare button(s) on Seip keyfobs to control other doors or items around the home ?
A/ Yes - Seip produce a range of receivers to enable gates, water pumps & lights etc. to be controlled by spare buttons on the keyfob Q/ Will I still be able to use the original hand transmitters ?
A/ Yes - by leaving the original Hormann receiver connected and attaching a new Seip receiver in addition, both new and old transmitters can be used to control a door (please note :- you won't benefit from the improved security of the Seip code hopping technology until the old receiver is disconnected) Q/ What is the range from which I can control the door ?
A/ Seip keyfobs have a range of approx. 75 - 100 Mtrs
|
|
